AnBerCraft

How to care for your AnBerCraft furniture.

Tile Top Furniture.

Use a wax based furniture polish to clean the wood.

You could use a damp cloth to clean the tiles if necessary, but please keep

any moisture away from the wood, as in time this will destroy the finish, and

dry immediately.

Solid Top Furniture.

Use a wax based furniture polish to clean the wood. Under no

circumstances should you use a damp cloth in any form whatsoever.

If a damp cloth is used and the finish deteriorates, then any warranty is

void.

Glass Top Furniture.

Please take the glass out separately to clean with any glass cleaner, the

wood can be cleaned with a wax based furniture polish. Please do not

under any circumstances clean the glass whilst it is still in the table as this

will destroy the wood finish and therefore void any warranty.

Kudos Range Oiled Finish Furniture

For general cleaning use only a soft dry cloth with a wax based furniture

polish. Over time the colour may fade so the oil may need to be re-applied.

To re-apply the oil:

1. Sand the surface with a fine grain sand paper (400 grit)

2. Apply the oil evenly over the surface with a soft dry cloth and allow to

dry, then repeat.

3. Leave to dry for 10-20 minutes then wipe off excess.

4. Leave furniture to dry for 24 hours before using.

A high quality furniture oil can be purchased from your furniture stockist.

Kudos Range Lacquered Finish Furniture.

Please take the glass out separately to clean with any glass cleaner, the

wood can be cleaned with a wax based furniture polish. Please do not

under any circumstances clean the glass whilst it is still in the table as

this will destroy the wood finish and therefore void any warranty.